|
One Way Shut Off: Coupler is valved, shutting of supply line at disconnect. Plug is unvalved,
exhausting downstream lin at disconnect. Always install coupler on pressure side of line.
Intechangeability: Standard industrial design, 3 and 5 series Automatic water service comply
with A-A-59439. 3,4,5,6 series meet ISO 6150-B, Ansi(NFPA)T3.20.14-1990. SV couplers meet ISO 4414.
Temperature range: -400F to 2250F
Seal Components: Buna-N seal compound. Other seals available on request.
Working Pressure: 300 psi; Vacuum to 26"Hg (connected)
|
Manual |
 |
Manual sockets require manual retraction of sleeve to both connect and disconnect the plug. |
-
low cost
-
positive locking mechanism
-
65% more ball retention
-
precision leakproof seal
-
heavy steel sleeve
|
|
Automatic |
 |
Automatic sockets accept the plug by simple insertion without the need to retract the sleeve to connect. |
-
one hand operation
-
one piece sleeve with rear crimp
-
precision leakproof seal
-
long wearing pin type locking mechanism with greater plug
|
|
Safety |
 |
Sleeve is moved straight forward to lock and turn on the air. The sleeve is moved back by rotating first to the left then to the right. |
-
100% safety
-
connect and disconnect at zero pressure
-
plug is securely locked before air is turned on
-
downstream line is exhausted before plug is release
-
tested to 100,000 operations with no leakage
-
special lubrication eliminates dry breakaway
-
can be used as 3 way on-off valve without disconnecting
|
*** Do note that special request and MOQ are required for most parts.
|